Customize Quality UV LED Light Board 12W 24V UVC 250nm 254nm 255nm 275nm 285nm 295nm 300nm 308nm 315nm LED 300mm Light Tube for Sterilization
| Item |
12W 250NM-315NM UV Led Light Tube |
| Brand Name |
GZYSLED |
| Power |
12W |
| Viewing Angle(°) |
120 |
| Wavelength |
250nm-315nm |
| Forward Current |
600mA |
| Application |
Water Sterilization, Phototherapy, UV Sensor Light, |
The 3535 UVC series is GZYSLED's newest surface mount high-power device featuring high brightness combined with a compact size that is suitable for all kinds of lighting applications such as general illumination, flash, spot, signal, industrial and commercial lighting. The 3535 series is one of the most promising devices in GZYSLED's high-power product offering and is ready to face the challenges of today's Solid-State Lighting requirements.
In recent years, the development and application of new products for UV LEDs have indeed become a hot spot in the LED industry. Compared with traditional mercury lamps, it has various excellent characteristics such as instant lighting, low power consumption, and environmental protection. Especially in the context of the
implementation of the Minamata Convention, which limits the mercury content after 2020, the use of UVLED technology to develop energy-efficient and environmentally-friendly high-efficiency light sources has become a major
technological trend.
Moreover, due to the difference in wavelength of ultraviolet LED (UVA: 320-400 nm) (UVB: 280 nm-320 nm) (UVC: 200-280 nm), the application scenarios involved are very broad, and the prospect is highly
promising.
For example: UVA-LED can be used for curing (glue, ink). UVB-LED is used for skin treatment (vitiligo, psoriasis).
UVC-LED is used for sterilization of solids, liquids and gases (straight drinkers, water dispensers, etc.).
Principle of ultraviolet disinfection
It is the use of ultraviolet light of an appropriate wavelength to destroy the molecular structure of DNA (deoxyribonucleic acid) or RNA (ribonucleic acid) in the cells of the microorganism, causing growth cell death and/or regenerative cell death to achieve sterilization and disinfection. After testing, the effective wavelength range of ultraviolet sterilization can be divided into four different wavelength bands: UVA (400 ~ 315nm), UVB (315 ~ 280nm), UVC (280 ~ 200nm) and vacuum ultraviolet (200 ~ 100nm). Among them, only the UVA and UVB parts can reach the surface of the earth through the ozone protective layer and the cloud layer. As far as the sterilization rate is concerned, UVC is within the range of microbial absorption peaks, and the virus and bacteria can be killed within 1 s by destroying the DNA structure of the microorganisms, while UVA and UVB are slow to sterilize because they are outside the range of microbial absorption peaks. It often takes hours to sterilize, and in the actual two-second hydraulic stop (irradiation) time, the part actually belongs to the inactive ultraviolet portion. Vacuum ultraviolet light penetration ability is very weak, lamps and casings need to use quartz with extremely high light transmittance. Generally, the semiconductor industry degrades TOC in water, and is not used for sterilization. Therefore, the ultraviolet disinfection mentioned in the water supply and drainage project actually refers to UVC disinfection. UV disinfection technology is based on modern epidemic prevention, medicine and photodynamics. It uses specially designed high-efficiency, high-intensity and long-life UVC-band ultraviolet light to spray various bacteria, viruses, parasites and algae in water. And other pathogens are directly killed to achieve the purpose of disinfection.
Studies have shown that ultraviolet light is mainly caused by radiation damage to microorganisms (bacteria, viruses, spores and other pathogens) and the function of destroying nucleic acids to kill microorganisms, thereby achieving the purpose of disinfection. The action of ultraviolet light on nucleic acids can lead to breakage of bonds and chains, cross-linking between strands and formation of actinic products, etc., thereby changing the biological activity of DNA, so that the microorganisms themselves cannot replicate, and this ultraviolet damage is also a fatal damage.
UV disinfection is a physical method. It does not add any substance to the water. It has no side effects. This is better than chlorination. It is usually used in combination with other substances. The common combination process is UV+H2O2, UV+H2O2. +O3, UV+TiO2, so the disinfection effect will be better.
Guangzhou Yingsheng Lighting Co., Ltd was established in 2020, located in Room 1003, No. 1, Yinfeng 1st Street,
Nansha Street, Nansha District, Guangzhou City, Guangdong Province, China. The company has its own brand. Their products including LED SMD Chip Light Source, Uv Light Lamp Moudle,LED Car Headlight, High Power COB
LED,Lighting Source Indoor, Ourdoor LED Lamp.
They have enough tests on the products to ensure the quality of the products and their goods will be delivered
after strict quality inspection. Their main areas of foreign trade are North America and Europe.
Q1: Do you supply OEM,ODM service?
A1: YES,absolutely it can be realized.
Q2: All the pictures are real photo?
A2: Yes, the pictures of all products on this page are 100% real shoot by us.
Q3: How can I get a quotation from you?
A3: Please kindly leave us messages about your needs,including products and quantity,our professional team will reply you very
soon (mostly within 6 hours).
Q4. Can I have a sample order for led light?
A4: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q5: How to place an order?
A5: If you want to place an order, Please feel free to send us an inquiry email or contact us by trademanager online, we will
reply you within 6hours(working day).
Q6. What about the lead time?
A6:Sample needs 3-5 days, mass production time needs 1-2 weeks for order quantity more than
Q7. How do you ship the goods and how long does it take to arrive?
A7: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
Q8. Is it OK to print my logo on led light product?
A8: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Audited Supplier 
){kind=link}