1.DC 12V~24V (sterilization module power 6~8W) It's recommended that
the power supply 2-3 times higher than module.
2.The line sequence of the power interface is: red anode and black
cathode (the red wire is connected to the positive electrode, and the
black wire is connected to the negative electrode. Forbidden to
reverse )
3.Water flow switch interface: the water flow switch accessories must
be connected to work normally. Or short-circuit this port as well
works normally.
4.The sterilizer can be powered on only after the sterilizer interface
marked on the icon is connected.
5.The module cannot be dry-burned and it can be energized for a long
time after the water circulated normally.
6.It's strictly forbidden test for a long time when there is no water flow
with power. The electrical test time should not exceed 30 seconds.
Audited Supplier 
){kind=link}