China Factory Sell 5W UVA 365nm LED 3535 Aln SMD 60deg Lens High Power LED Diode

• Customization: Available
• LED Packaging Type: Chip
• Chip Material: InGaN
• Beam Angle: 60°
• Emitting Color: Purple
• Base Material: Copper
• Power: 5W
• Life: 30000h
• Certification: RoHS
• Product Name: 5W 365nm-370nm UVA LED 60 Degree
• Wavelength: 365nm-370nm
• Forward Current: 300mA-1000mA
• Input Voltage: 3.4V-4V
• Power Dissipation: 5W
• Radiation Flux: 1550MW-2300MW
• Operating Temperature(ºC): -20 - 60
• Storage Temperature(ºC): -20 - 85
• Working Time: 30000 Hours
• Lifespan (Hours): 50000 Hours
• Support Dimmer: Yes
• Warranty(Year): 1 Year
• Type: UV LED
• Application 1: Printing
• Application 2: UV Ink Curing Photo-Catalyst Sensor Light
• Transport Package: Carton
• Specification: 1000 PCS/Roll
• Trademark: GZYSLED
• Origin: China
• HS Code: 9405990000
• Production Capacity: 1000/Week

Product Description

Specification

 

Item	5W 365nm-415nm UV Led Diode
Brand Name	GZYSLED
Power	5W
Voltage	3.4V-4V
Viewing Angle	30, 60 ,120
Wavelength	365nm-415nm
Forward Current	350mA-1000mA
Luminous Flux	1550-2300MW
Application	UV Ink Curing Photo-Catalyst Sensor Light nail lamp
Dimension	120 Angle: 3.4x3.4x3mm 60 Angle: 3.8*3.8*3.0mm 30 Angle: 3.8*3.8*3.5mm

 

(UVA360NM-430NM)Applications :

1. UV Curing
2. Printing 
3. Coating
4. Adhesive
5. Counterfeit Detection/ Security
6. UV Torch
7. Fluorescence Photography
8. Dental Curing
9. Crime Inspection
10. Oil leak Detection

Product Description

 

 

The 3535 UVC series is GZYSLED's newest surface mount high-power device featuring high brightness combined with a compact size that is suitable for all kinds of lighting applications such as general illumination, flash, spot, signal, industrial and commercial lighting. The 3535 series is one of the most promising devices in GZYSLED's high-power product offering and is ready to face the challenges of today's Solid-State Lighting requirements.
 

In recent years, the development and application of new products for UV LEDs have indeed become a hot spot in the LED industry. Compared with traditional mercury lamps, it has various excellent characteristics such as instant lighting, low power consumption, and environmental protection. Especially in the context of the 
implementation of the Minamata Convention, which limits the mercury content after 2020, the use of UVLED technology to develop energy-efficient and environmentally-friendly high-efficiency light sources has become a major 
technological trend.

Moreover, due to the difference in wavelength of ultraviolet LED (UVA: 320-400 nm) (UVB: 280 nm-320 nm) (UVC: 200-280 nm), the application scenarios involved are very broad, and the prospect is highly
promising.

For example: UVA-LED can be used for curing (glue, ink). UVB-LED is used for skin treatment (vitiligo, psoriasis). 
UVC-LED is used for sterilization of solids, liquids and gases (straight drinkers, water dispensers, etc.).

 

Principle of ultraviolet disinfection

It is the use of ultraviolet light of an appropriate wavelength to destroy the molecular structure of DNA (deoxyribonucleic acid) or RNA (ribonucleic acid) in the cells of the microorganism, causing growth cell death and/or regenerative cell death to achieve sterilization and disinfection. After testing, the effective wavelength range of ultraviolet sterilization can be divided into four different wavelength bands: UVA (400 ~ 315nm), UVB (315 ~ 280nm), UVC (280 ~ 200nm) and vacuum ultraviolet (200 ~ 100nm). Among them, only the UVA and UVB parts can reach the surface of the earth through the ozone protective layer and the cloud layer. As far as the sterilization rate is concerned, UVC is within the range of microbial absorption peaks, and the virus and bacteria can be killed within 1 s by destroying the DNA structure of the microorganisms, while UVA and UVB are slow to sterilize because they are outside the range of microbial absorption peaks. It often takes hours to sterilize, and in the actual two-second hydraulic stop (irradiation) time, the part actually belongs to the inactive ultraviolet portion. Vacuum ultraviolet light penetration ability is very weak, lamps and casings need to use quartz with extremely high light transmittance. Generally, the semiconductor industry degrades TOC in water, and is not used for sterilization. Therefore, the ultraviolet disinfection mentioned in the water supply and drainage project actually refers to UVC disinfection. UV disinfection technology is based on modern epidemic prevention, medicine and photodynamics. It uses specially designed high-efficiency, high-intensity and long-life UVC-band ultraviolet light to spray various bacteria, viruses, parasites and algae in water. And other pathogens are directly killed to achieve the purpose of disinfection.

Studies have shown that ultraviolet light is mainly caused by radiation damage to microorganisms (bacteria, viruses, spores and other pathogens) and the function of destroying nucleic acids to kill microorganisms, thereby achieving the purpose of disinfection. The action of ultraviolet light on nucleic acids can lead to breakage of bonds and chains, cross-linking between strands and formation of actinic products, etc., thereby changing the biological activity of DNA, so that the microorganisms themselves cannot replicate, and this ultraviolet damage is also a fatal damage.

UV disinfection is a physical method. It does not add any substance to the water. It has no side effects. This is better than chlorination. It is usually used in combination with other substances. The common combination process is UV+H2O2, UV+H2O2. +O3, UV+TiO2, so the disinfection effect will be better.

Company Profile

 

 

 

 

Certifications

Packaging & Shipping

 

 

 

FAQ

Q1: Do you supply OEM,ODM service?
A1: YES,absolutely it can be realized.

Q2: All the pictures are real photo?
A2: Yes, the pictures of all products on this page are 100% real shoot by us.

Q3: How can I get a quotation from you?
A3: Please kindly leave us messages about your needs,including products and quantity,our professional team will reply you very
soon (mostly within 6 hours).

Q4. Can I have a sample order for led light?
A4: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

Q5: How to place an order?
A5: If you want to place an order, Please feel free to send us an inquiry email or contact us by trademanager online, we will
reply you within 6hours(working day).

Q6. What about the lead time?
A6:Sample needs 3-5 days, mass production time needs 1-2 weeks for order quantity more than

Q7. How do you ship the goods and how long does it take to arrive?
A7: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.

Q8. Is it OK to print my logo on led light product?
A8: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.