| Customization: | Available |
|---|---|
| LED Packaging Type: | Chip |
| Chip Material: | AlGaInP |
|
Still deciding? Get samples of US$ 0.2/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
|
Dimension |
14.6x8.0x5.15mm |
|
Power Consumption |
2W |
|
Color Temperature |
red |
|
Current |
500mA |
|
Voltage |
1.8-2.4v |
|
Application |
Linear Fixture/street light/high bay light/flood light |
Warm Tip:The above parameters are for reference. Wavelength Angle, PCB can be customized Eccording to requirements
Applications:
Our products are widely used in various applications such as medical, life science, industrial Equipment, non-destructive testing,
and analytical equipment.
Substance / Matter Analysis//Hyperspectral Imaging
Machine Vision //Sorting Units (by raw material, by colour, etc.)
Detection of Foreign Matter//Blood Oxygen Saturation Analysis
Endoscopic Procedures//Photo Dynamic Therapy
Instrument Diagnostics and Research Execution//Spectroscopy
Soldering Conditions
• When soldering High Power Led, Heat may affect the electrical and optical characteristics of the LEDs.
• In soldering, do not stress the lead frame and the resin part under high temperatures.
• The silicone part should be protected from mechanical stress or vibration until the High Power Led return to room temperature after soldering.
• Preliminary heating to be at 140˜160ºC max, for 120 seconds max.
• Soldering heat to be at 260ºC max, for 3 seconds max.
• For manual soldering is not more than 3 seconds at max 260ºC, under soldering iron.
Notes:
1. The Anode side of the emitter is denoted by the "+" Sign in the lead frame.
2. Electrical insulation between the case and the board is required. Do not electrically connect either the anode or cathode to the slug.
3. Drawing not to scale.
4. All dimensions are in millimeters.
5. Unless otherwise indicated, tolerances are ± 0.2mm.
6. Please do not bend the leads of the LED, otherwise it will damage the LED.
7. Please do not use a force impact or pressure on the lens of the LED, otherwise it will cause a catastrophic failure.
Q1: Do you supply OEM,ODM service?
A1: YES,absolutely it can be realized.
Q2: All the pictures are real photo?
A2: Yes, the pictures of all products on this page are 100% real shoot by us.
Q3: How can I get a quotation from you?
A3: Please kindly leave us messages about your needs,including products and quantity,our professional team will reply you very
soon (mostly within 6 hours).
Q4. Can I have a sample order for led light?
A4: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q5: How to place an order?
A5: If you want to place an order, Please feel free to send us an inquiry email or contact us by trademanager online, we will
reply you within 6hours(working day).
Q6. What about the lead time?
A6:Sample needs 3-5 days, mass production time needs 1-2 weeks for order quantity more than
Q7. How do you ship the goods and how long does it take to arrive?
A7: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
Q8. Is it OK to print my logo on led light product?
A8: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
){kind=link}