3535 LED 1.5MW with 30degree Lens 230nm 235nm 225nm LED 240nm 222nm Far UV-C

• LED Packaging Type: Chip
• Chip Material: InGaN
• Beam Angle: 30°
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Emitting Color: Purple
• IP Rating: IP33
• Base Material: Copper
• Power: 1.5W
• Life: 30000h
• Certification: RoHS
• Product Name: SMD 1.5W 8-13V 225nm-235nm LED Chip
• Wavelength: 225-235nm
• Forward Current: 200mA
• Input Voltage: 6V
• Size: 3.5*3.5*3.5mm
• Type: UVC LED
• Radiation Flux: 1-3MW
• Operating Temperature(ºC): -10 - 25
• Storage Temperature(ºC): -10 - 60
• Working Time: 10000 Hours
• Lifespan (Hours): 30000 Hours
• Support Dimmer: Yes
• Warranty(Year): 1 Year
• Application 1: Water Sterilization
• Power Consumption: 1.5W
• Transport Package: Carton
• Specification: 1000 PCS/Roll
• Trademark: GZYSLED
• Origin: China
• HS Code: 8541410000
• Production Capacity: 1000/Week
• Package Size: 15.00cm * 10.00cm * 5.00cm
• Package Gross Weight: 0.500kg

Product Description

*High absorption, low penetration into human skin*

 

Specification

Dimension	3.5*3.5*3.5mm
Power Consumption	0.5W
Peak Wavelength	225-235NM
Radiant Flux	1-3MW
Spectrum Half Width	12NW
Forward Current	200MA

Deep Ultraviolet Light Emitting diode Peak wavelength 230 nm
Features:
Light Source for Sterilization and Medical Application
▪ Lighting Color(Peak Wavelength) : 230 nm
▪ Surface Mount Type LED: 3.6 x 3.6 x 1.5 (L x W x H) [Unit : mm]
▪ Soldering Methods: Reflow Soldering
Electro-Optical Characteristics (I F = 100 mA, T a = 25 ºC)
Forward Voltage:6-8V;
Radiant Flux:3MW
Peak wavelength:225-230-235nm
Spectrum Half Width:11NM
Viewing Angle:TBD
Thermal Resistance Note 2
(Junction to Solder point):TBD
Package:1000pcs/roll
Notes :
1. Measured by optical spectrum analyzer of YSLED, some values may vary depending
on the conditions of the test equipment.
- Forward Voltage (Vf) : ±0.1V
- Peak Wavelength (λ p ) : ± 3nm
- Radiant Flux (P o ) : ±10%
2. Thermal resistance can be increased substantially depending on the heat sink design/operating
condition, and the maximum possible driving current will decrease accordingly.
applications:
▪ Disinfection, Phototherapy, Fluorescent Spectroscopy, Sensor Light,
Bio-Analysis / Direction, Counterfeit Detector etc.
Operating the LED beyond the listed maximum ratings may affect device reliability and
cause permanent damage. These or any other conditions beyond those indicated under
recommended operating conditions are not implied. The exposure to the absolute maximum
rated conditions may affect device reliability.
- The LEDs are not designed to be driven in reverse bias.
UVC application
1. Surface sterilization: medical appliances, maternal and infant supplies, smart toilet, refrigerator,tableware cabinet, fresh-keeping box, smart trashcan, Thermos Cup, escalator, hand and ticket machine buttons and other high-frequency public contact surfaces
2. Still Water Sterilization: Drinking Water tank,humidifier, ice machine
3. Mobile Water Sterilization: Mobile Water Sterilization Module, Direct Drinking Water Machine;
4. Air Sterilization: Air Purifier, air conditioning; ,5. Industrial Applications: Medical phototherapy,fluorescence spectrum detection, optical sensors, biological analysis/detection, anti-counterfeit detection, etc.

Product Description

How to calculate the total light intensity

 
UV dose refers to the amount of ultraviolet light of a specific wavelength required to reach a certain rate of bacterial inactivation:
 
Total Lightin Intensity(J/m2) = irradiation time (s) X  UVC intensity (W/m2)
The greater the irradiation dose, the higher the disinfection efficiency.
 
The higher the UVC  light power, the shorter the time required to kill bacteria and viruses, and vice versa, the lower the light power,The longer it takes to sterilize.

Company Profile

 

Certifications

Packaging & Shipping

 

FAQ

Q1: Do you supply OEM,ODM service?
A1: YES,absolutely it can be realized.

Q2: All the pictures are real photo?
A2: Yes, the pictures of all products on this page are 100% real shoot by us.

Q3: How can I get a quotation from you?
A3: Please kindly leave us messages about your needs,including products and quantity,our professional team will reply you very
soon (mostly within 6 hours).

Q4. Can I have a sample order for led light?
A4: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

Q5: How to place an order?
A5: If you want to place an order, Please feel free to send us an inquiry email or contact us by online, we will
reply you within 6hours(working day).

Q6. What about the lead time?
A6:Sample needs 3-5 days, mass production time needs 1-2 weeks for order quantity more than

Q7. How do you ship the goods and how long does it take to arrive?
A7: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.

Q8. Is it OK to print my logo on led light product?
A8: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.